QMS 1060E, Операция

Страница: 56 / 116

Introduction
QMS 1060E Print System Operation 5-2
Introduction
This chapter describes how to improve print quality. Density, gamma
correction, screen frequency, and screen angles are some of the fac-
tors that affect print quality. Your QMS 1060E Print System is a multi-
resolution printer. This technology gives you more flexibility to control
the print quality factors.
About Print Density
Print density is the amount of toner placed on the page, making the
print appear lighter or darker. The higher the density, the darker the
print looks and the higher the contrast is on the page.
» Note: Remember that the print may also appear lighter on the page if
Conserve Toner (Administration/Engine/Conserve Toner) is set to On.
Print density is selected through a control panel menu. If the print is
too dense, you can lower the density setting; if it is too light, you can
raise the density setting.
About Gamma Correction
Gamma correction is the compression or expansion of the ranges of
dark or light shades in a printed image to provide the best copy of
scanned images. Through manipulation of shading levels, your
printer can be set to improve the print quality of scanned images
Menu Administration/Engine/Print Density
Choices 0—Lowest density
to
6—Highest density
Default 3