Qlogic FastLinQ 3400 Series, Руководство пользователя, Страница: 194 / 287

13–Microsoft Virtualization with Hyper-V
Teamed Network Adapters
166 83840-546-00 E
Windows Server 2008
When configuring a team of 8400/3400 Series network adapters on a Hyper-V
system, be aware of the following:

Create the team prior to binding the team to the Hyper-V virtual network.

Create a team only with an adapter that is not already assigned to a Hyper-V
virtual network.

In an IPv6 network, a team that supports CO and/or LSO and is bound to a
Hyper-V virtual network will report CO and LSO as an offload capability in
the QCC GUI; however, CO and LSO will not work. This is a limitation of
Hyper-V. Hyper-V does not support CO and LSO in an IPv6 network.

To successfully perform VLAN tagging for both the host (parent partition)
and the guest (child partition) with the QLASP teaming software, you must
configure the team for tagging. Unlike VLAN tagging with a single adapter,
tagging cannot be managed by Hyper-V when using QLASP software.

When making changes to a team or removing a team, remove the team’s
binding from all guest OSs that use any of the VNICs in the team, change
the configuration, and then rebind the team’s VNICs to the guest OS. This
can be done in the Hyper-V Manager.
Hyper-V virtual
switch over a teamed
adapter Yes Yes Yes –
Hyper-V virtual
switch over a VLAN Yes Yes Yes –
iSCSI boot No No* No* *Remote boot to SAN is sup-
ported.
Virtual Machine
Queue (VMQ) No Yes Yes See “Configuring VMQ with
SLB Teaming” on page 167 .
RSC No No Yes
Table 13-2. Configurable Teamed Network Adapter Hyper-V Features
Feature
Supported in Windows
Server Version
Comments/Limitation
2008
2008
R2
2012