Qlogic FastLinQ 3400 Series, Руководство пользователя, Страница: 122 / 287

8–iSCSI Protocol
iSCSI Boot
94 83840-546-00 E
4. In the MBA Configuration menu ( Figure 8-11 ), use the up or down arrow
keys to select each of following parameters.

VLAN Mode : Press ENTER to change the value to Enabled

VLAN ID : Press ENTER to open the VLAN ID dialog, type the target
VLAN ID (1–4096), and then press ENTER.
Figure 8-11. Configuring iSCSI Boot VLAN
5. Press ESC once to return to the Main menu, and a second time to exit and
save the configuration.
6. Select Exit and Save Configurations to save the VLAN for iSCSI boot
configuration ( Figure 8-12 ). Otherwise, select Exit and Discard
Configuration . Press ENTER.
Figure 8-12. Saving the iSCSI Boot VLAN Configuration
7. After all changes have been made, press CTRL+ALT+DEL to exit CCM and
to apply the changes to the adapter's running configuration.
Other iSCSI Boot Considerations
There are several other factors that should be considered when configuring a
system for iSCSI boot.
Changing the Speed and Duplex Settings in
Windows Environments
Changing the Speed & Duplex settings on the boot port using Windows Device
Manager when performing iSCSI boot through the offload path is not supported.
Booting through the NDIS path is supported. The Speed & Duplex settings can be
changed using the QCC GUI for iSCSI boot through the offload and NDIS paths.