Qlogic FastLinQ 3400 Series, Руководство пользователя, Страница: 152 / 287

9–Fibre Channel Over Ethernet
FCoE Boot from SAN
124 83840-546-00 E
3. In the FCoE Target Parameters window, there are eight target entries in
which you can enable the target (Connect
n ), select or type a WWPN
(WWPN n ), and type a boot LUN number (Boot LUN n ) ( Figure 9-8 ).
Figure 9-8. FCoE Target Parameters Window
The first six target entries (1-6) enable you to select a WWPN from a menu.
Use the UP and DOWN arrows to select the WWPN field, and then press
ENTER. In the WWPN list, use the UP and DOWN arrows to select a
WWPN, and then press ENTER.
Figure 9-9. Selecting an FCoE WWPN
The last two target entries (7, 8) enable you to type a WWPN. In the WWPN
field, type the WWPN, and then press ENTER.
4. Press ESC until prompted to exit and save changes.