Qlogic FastLinQ 3400 Series, Руководство пользователя, Страница: 102 / 287

8–iSCSI Protocol
iSCSI Boot
74 83840-546-00 E
To configure the iSCSI boot parameters using static configuration:
1. In the Main menu, select iSCSI Boot Configuration ( Figure 8-5 ), and then
press ENTER.
Figure 8-5. Selecting iSCSI Boot Configuration
2. In the iSCSI Boot Main menu, select General Parameters ( Figure 8-6 ), and
then press ENTER.
Figure 8-6. Selecting General Parameters
1. In the General Parameters menu, use the up or down arrow keys to select a
parameter, and then use the right or left arrow keys to set the following
values.

TCP/IP Parameters via DHCP : Disabled (IPv4)

IP Autoconfiguration : Disabled (IPv6)

iSCSI Parameters via DHCP : Disabled

CHAP Authentication : As required

Boot to iSCSI Target : As required

DHCP Vendor ID : As required

Link Up Delay Time : As required

Use TCP Timestamp : As required

Target as First HDD : As required

LUN Busy Retry Count : As required