General
UM Pallet stacker Prmk10-PS v2.0 EN
7
2
General
The pallet stacker module is an accessory of the vertical conveyor Prmk10 and has to be
identified by the Prmk10 on which it is installed. The layout drawing and specification of the
pallet stacker are bundled in the documentation of the Prmk10.
Pallet stacker identification
The machine identification is given on the type plate of the Prmk10. The type plate is located
on the drive section of the Prmk10. Refer to the specification sheet of this serial number for
specifications of this machine
Machine layout drawing and specifications
After a machine order is placed, a machine drawing and specification sheet is sent for
approval. After approval the machine drawing and specification sheet are sent as a reference
for this manual. The machine drawing and specification sheet include:
•
Machine serial number
•
Product dimensions and mass
•
Machine dimensions and mass
•
Machine configuration
•
Machine capacity
•
Maximum load
The machine can only be used according to the specifications given in this manual, in the
machine layout drawing and in the specifications sheet. If you want to use the machine outside
these specifications, you must contact Qimarox to check if this is possible. Inappropriate
and/or modified use of the machine can result in dangerous safety issues and/or damage. You
must obtain written confirmation from Qimarox before using the machine in a modified or
unspecified manner. Qimarox cannot be held liable for any accidents and/or damages that
may occur through inappropriate unauthorized use of the machine.
