Qilive Q.1660, Руководство пользователя

Страница: 10 / 88

10
EN EN
4. Press the [Vol+] button (6). The setting is activated when the Status LED
(2) blinks 3 times then goes off. The [Vol+] (6), [Vol-] (8) and [MUTE] (22)
buttons have then been successfully transferred.
Unlocking the volume control - Volume unlock
1. Simultaneously press the [SETUP] (9) button for approximately 3 seconds
until the Status LED (2) comes on solidly.
2. Use the corresponding device selection button (e.g. [TV]) to select to
device to which the volume setting has been transferred. Once a selection
has been successfully made, it‘s confirmed by the Status LED (2) blinking
once then staying lit.
3. Press the [MUTE] button (22). The Status LED (2) will blink once then
stay solidly lit.
4. Press the [Vol-] button (8). The setting is deactivate when the Status LED
(2) blinks 3 times then goes off. The [Vol+] (6), [Vol-] (8) and [MUTE] (22)
buttons have then been successfully unlocked.
NB:
This function is deactivated in the default factory settings.
5.3. Macro Power
With Macro Power, you can turn on/off two audiovisual devices at the same time.
To activate the Macro Power function
1. Simultaneously press on the [MUTE] (22) and [Vol+] (6) buttons for
approximately 3 seconds until the Status LED (2) comes on and stays
solid.
2. Use the button to select the device that you want to pair with your remote
control (e.g. [TV]). A successful selection is indicated by the Status LED
(2) blinking once then staying solidly lit.
3. Enter the code [9] [5] [0], and the Status LED (2) will blink twice then
stay solidly lit.
4. Use the device selection button to select the second device to pair with
your remote control (e.g. [STB]), which should be turned on in future. A
successful selection is indicated by the Status LED (2) blinking once then
staying solidly lit.
5. Press the [OK] button (17). The setting has been successfully activated
when the Status LED (2) blinks 3 times then going off.
To deactivate the Macro Power function
1. Simultaneously press on the [MUTE] (22) and [Vol+] (6) buttons for
approximately 3 seconds until the Status LED (2) comes on and stays
solid.
2. Use the button to select the device that you want to pair with your remote
control (e.g. [TV]). A successful selection is indicated by the Status LED
(2) blinking once then staying solidly lit.
3. Enter the code [9] [5] [0], and the Status LED (2) will blink twice then stay
solidly lit.
4. Use the device selection button to select the second device (e.g. [STB])
which was previously switched on. A successful selection is indicated by
the Status LED (2) blinking once then staying solidly lit.
5. Press the [EXIT] button (14). The setting has been deactivated when the
Status LED (2) blinks 3 times then goes off.
NB:
• If an invalid code is entered, the Status LED (2) will blink 3 times then stay solidly