QHYCCD QHY16200A, Руководство пользователя

Страница: 22 / 42

QHY16200A
06 Peripheral Ports on QHY16200A
Note that the camera used in the picture above isn’t QHY16200A, it is QHY16803A. They have
the same peripheral ports.
Serial ports
QHY16200A provides two serial ports, which are connected to the built-in USB hub through FTDI
USB to Serial chip. These two serial ports provide standard RS232 signal level(
±
10V). You can use
it to connect your camera to electric focuser and even equatorial mount. But note that this signal
level is different from TTL signal level used in EQMOD. If you want to connect your camera to
equatorial mount through EQMOD, A signal level convertor between TTL and RS232 is needed.
After you finished installing the drivers, the serial ports drivers should also be installed. You can
check its COM number in the device manager in the Windows so that you can use it in your
application software.
Serial port cable is optional accessary, and QHYCCD is developing many types of serial port cable.
You can contact QHYCCD to know if there's serial port cable you need.
The pin arrangement is already shown in the picture above.