QHT Direct Vent DVF-4 Rigid, Руководство по установке

Страница: 9 / 24

7
3.2 DVO Termination Connection
Termination Connection
1. Slide the terminal inner section over the flexible vent pipe.
2. Attach the adaptor as per the joint assembly instructions.
3. Apply a bead of sealant around the flue collar and slide on adaptor and tighten gear
clamp.
4. Seal the seam on the adaptor.
5. Slide the terminal inner section over the terminal outer section and secure by
tightening the gear clamp.
6. Stretch the intake flex to the desired length and slide over intake collar and secure by
tightening the gear clamp.
7. Seal the gap between the vent pipe and the terminal inner section with silicone
sealant.