7
9) SETTING THE CUTTING DEPTH (Fig 4)
NOTE
: It is recommended to set the cutting depth approximately 2mm deeper than the material
thickness.
1) Unlock the cutting depth indicator lever.
2) Slide the cutting depth indicator to the desired depth of cut.
3) Lock down the cutting depth indicator lever.
10) TRIGGER RELEASE SWITCH (Fig 5 )
1) Plug the power cord plug into a standard household 230-240V.50Hz AC only outlet.
2) To activate the trigger switch to turn the Multi Saw “ON”, place your middle fingers into
the molded grip block, squeeze the grip block “back” until it turns the Multi Saw “ON”.
3) To STOP the Multi Saw, release the trigger, the switch will move back automatically into the
“OFF” position.
Tel: 01335 347300
Fig 4 Setting the Cutting Depth
Fig 5 Trigger Release Switch