c) Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool’s operation.
If damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations other than those intended could result
in a hazardous situation.
4
5) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6) ADDITIONAL SAFETY WARNING
a) An RCD adaptor and personal protection devices like electrician’s rubber gloves and footwear
will further enhance your personal safety.
b) Keep handles dry, clean and free from oil and grease. Slippery hands cannot safely control
the power tool.
c) Use clamps or another practical way to secure and support the workpiece to a stable
platform. Holding the work by hand or against your body leaves it unstable and may lead to
loss of control.
d) Develop a periodic maintenance schedule for your tool. When cleaning a tool be careful
not to disassemble any portion of the tool since internal wires may be misplaced or
pinched or safety guard return springs may be improperly mounted. Certain cleaning
agents such as gasoline, carbon tetrachloride, ammonia, etc. may damage plastic parts.
General Specifications
Main power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 600W
Voltage Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 230-240 V, 50 Hz
Amperage Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 2.7 A
No Load Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7400
Disc diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Φ85mm
Disc arbor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Φ10mm
Max. cutting depth (Mini circular Multi Saw). . . . . . . . . . . . . . . 25mm
Max. cutting depth (Mitre base). . . . . . . . . . . . . . . . . . . . . . . . 17mm
Tel: 01335 347300