The controller is preset and in most cases, it is not necessary to adjust the settings.
Normally, the screen will show the current temperature within the cabinet.
High / Low Temperature Monitoring
The controller records the highest and lowest temperatures monitored.
To view the stored values, press
.
The display will flash
followed by the lowest recorded temperature.
Press
again to display the high value.
The display will flash
followed by the highest recorded temperature.
If
is pressed again, the display will flash
followed by the current chamber temperature.
Pressing
again will return to
and the menu will cycle as described above.
If the buttons are not touched for
�
10 seconds, the screen will return to normal
Resetting the Recorded High / Low Values
Display the value that you would like to reset (
or
, as described above). While it is showing,
press and hold
until the screen shows
.
Please note that each value (
and
) is reset individually.
Control
The digital controller is placed in the control panel, see fig 2
fig 2
4 MCRTL21.1
