QED CRT410 Скачать руководство пользователя страница 2

Controlled room temperature cabinet

For the storage of items b15 and +25 °C, in an ambient environment of up to 43°C

Important Safety Instructions

Read the instruction manual before using the cabinet.
It is the user’s responsibility to operate the appliance in accordance with the instructions given.

Contact your dealer immediately in case of any malfunctions

Care must be taken when moving this cabinet to avoid posing a hazard to persons or property

The cabinet is for indoor use only.
Keep the cabinet away from heat sources and do not expose it to direct sunlight.
Do not install the cabinet near a ventilation or air conditioning system
Using the cabinet in an ambient temperature that reaches extremes of cold (for example in
goods bay where the temperature is largely affected by the outside) may affect the internal
temperature regulation.
Place the cabinet in a dry and ventilated place.
This cabinet is not to be used to store volatile substances, or anæsthetic or other flammable
gasses.

Power supply

:

The cabinet is designed for: 220 – 240 V, 50 Hz
The appliance must be correctly earthed.
The cabinet is fitted with a B.S. 1363 (UK) mains plug. A 13 amp fuse must be used.
The flexible cord fitted has three cores. The colours used are:
Green/Yellow: Earth
Blue:  Neutral
Brown: Live

Do not use this appliance with multi‐socket distribution / extension leads.

E

x

ternal Alarm Contacts:

Voltage free, NO / NC contacts rated to 1 A, 250 V max

A complete disconnection from the mains is possible by removing the plug from the wall
socket. When installing the cabinet, ensure that the socket is easily accessible.
Do not use the cabinet if the power supply cable becomes damaged.

There are no user serviceable parts inside. Any service / repair must be done only by
competent persons, qualified to do the work.

The production of this cabinet did not involve asbestos or any CFC. The oil in the compressor
does not contain PCB

Disposal:

This appliance contains refrigerants as well as recyclable materials. Disposal
of the cabinet must take place in an environmentally correct way. Please note
existing regulation on disposal.

2                                                                                                                                                                        MCRTL21.1

Содержание CRT410









Отзывы: