QDI KinetiZ 7T, Руководство пользователя

Страница: 38 / 54

Manual for KinetiZ 7T
l Modem Use IRQ 3,5,7,9,10,11 Special Wake-up event for Modem.
NA
l Soft-off by Instant-off The system will power off immediately once the
PWRBTN power button is pressed.
Delay 4 Sec The system will not power off until the power
button has been pressed continuously for more
than 4 seconds.
l State After power On
failure OFF
l Wake Up Events Press Enter sets the following items.
l VGA O n VGA active reloads global timer.
Off VGA active has no influence to global timer.
l LPT&COM NONE Default setting is recommended.
LPT
COM
LPT/COM
l HDD&FDD O N Default setting is recommended.
O F F
l PCI Master O N Default setting is recommended.
O F F
l PowerOn by PCI Disable Disables power-on by PCI card.
Card Enable Enables power-on by PCI card.
l Modem Ring Enabled Allows the system to be powered on when a ring
Resume indicator signal comes up to UART1 or UART2
from an external modem or comes up to WOM
header from an internal modem card, or when a
remote wake up signal comes up to the WOL
header from LAN adapter.
Disabled Does not allow wake up on LAN or wake up
from internal/external modem.
l RTC Alarm Enabled RTC alarm can be used to generate a wake event
Resume to power up the system which is in power-off
status. You can set any date or any time to
power up the system.
Disabled RTC has no alarm function.
l Primary INTR O n Allows wake up from IRQ.
Off Does not Allows wake up from IRQ.
l IRQs Activity Press Enter
Reloads global timer.
Monitoring
BIOS Description