QDI KinetiZ 7T, Руководство пользователя

Страница: 18 / 54

Manual for KinetiZ 7T
Power LED Connector (PWRLED)
The power LED has four status. When the system is in power up status, the LED is on.
When the system is in suspend status, the LED is blink. When the system is in Suspend to
RAM, the LED is off. When the system is in Soft-Off status, the LED is off.The connector has
an orientation.
Key-Lock Connector(KEY_L)
The connector can be connected to the keyboard lock switch on the case for locking the
keyboard.
Fan Connector (CPUFAN, CHSFAN. FAN3)
These connectors support cooling fans of 35ma or less. Besides speed of the FAN3, The
speeds of the CPU fan and chassis fan can be detected and viewed in “PC Health Status”
section of the BIOS, . They will be automatically turned off after the system enters suspend
mode.
HDLED
SPEAKER
ACPI_LED
RESET
Power
SW
SLEEP
GREEN_LED
POWER_LED
KEY_L
HDDLED
SPKDA
TA
NC
GND VCC
HDDLED
SPEAKER
GND
RE-
RESET
EMPTY
LED
LED LED
Green_LED
KEYLOCK
GND
KEY_L
LED1 - LED2 - LED+(VCC) POWER
GND
EMPTY
LED LED - LED -
SLEEP GND
EMPTY
ACPI
LED
Power
SLEEP POWER
LED
FAN GND
+12V
SENSE
FNA3
CHSFAN
FAN GND
+12V
SENSE
FAN GND
+12V
SENSE
CPUFAN
Installation Instruction