QDI KinetiZ 7T, Руководство пользователя

Страница: 21 / 54

Manual for KinetiZ 7T
Expansion Slots & I/O Ports description
Slot / Port Description
PCI 1 First PCI slot.
PCI 2 Second PCI slot.
PCI 3 Third PCI slot.
PCI 4 Fourth PCI slot.
PCI 5 Fifth PCI slot.
DIMM1 First DIMM slot.
DIMM2 Second DIMM slot.
DIMM3 Third DIMM slot.
IDE 1 Primary IDE port.
IDE 2 Secondary IDE port.
AMR AMR slot.
AGP AGP slot.
FLOPPY Floppy Drive Port.
Jumper Settings
Jumpers are located on the mainboard. Pin 1 for all jumpers are located on the side with a
thick white line ( Pin1
→
), refer to the mainboard’s silkscreen . Jumpers with three
pins will be shown as to represent pin1 & pin2 connected and to represent
pin2 & pin3 connected.
Suspend to RAM Switch (J12)
If you want to Disable Suspend to RAM function, set J13 with pin2&pin3 closed, meanwhile,
set “ACPI Suspend Type” to S1 in “Power Management Setup” section of the BIOS. Other-
wise, set J13 with pin1&pin2 closed for implementing this function.
Warning: If you set J13 with pin2&pin3 closed and set “ACPI Suspend Type” to S3 in
“Power Management Setup” section of the BIOS, the blank screen will come out,
in this case, just clear CMOS and boot up the system once again.
chapter 2
J12
1
J12
1
Disable STR
Enable STR