QDI KinetiZ 7T, Руководство пользователя

Страница: 14 / 54

Manual for KinetiZ 7T
Creative CT5880 chipset
The CT5880 provides high-quality audio performance and low CPU utiliaztion for you.
Featuring 128-vioce wave-table synthesis with very high sample rate converters. In
addition, CT5880 supports localized three-dimensional sound immersion in headphone
and four-speaker environments. The four-speaker based on speaker-out and line-in jack.
the CT5880 also supports multiple algorithm levels of reverb and chorus effects on the
wave-table sounds as well as spatial sound enhancement on MIDI and wave sounds in
two speakers. Full duplex operation also allows simultaneous audio recording and play-
back.
The KinetiZ 7T mainboard has two solution for on-board sound.
Note: If Creative ® CT5880 chip is onboard, the slave card must be installed in
the first PCI slot.
Installation of CT5880 driver
Before you install CT5880 chipset driver, please make sure that CT5880 chipset is onboard.
1. If CT5880 chipset is onboard, the CD2000 will detected it and the option “ PCI Sound
Driver” will appear on screen, you click this option to install CT5880 chipset driver .
2. If CT5880 is not onboard, the CD 2000 will detected AC97codec and the option “ Audio
Codec Driver” will appear on screen, you click this option to complete the installation
Soft-sound(AC’97codec)
Hardware-sound(CT5880)(Option)
Note : After installation of CT5880dirver, you
can select four speaker output function
Introduction