QDI Brilliant IV, Руководство пользователя

Страница: 42 / 67

AWARD BIOS Description
34
Note:This function is available only for DOS and
other OS that does not trap INT13.
•
Pentium(R)II
L1/L2 Cache
Enabled
Disabled
Enables Pentium® II internal Level1/Level2 cache.
Disables Pentium® II internal Level1/Level2 cache.
•
Pentium(R)II
L2 Cache ECC
Enabled
Disabled
Enables Pentium® II L2 cache ECC(Error Checking
and Correction) function.
Disables Pentium® II L2 cache ECC function.
•
Quick Power
On Self Test
Enabled Enables quick POST. BIOS will shorten or skip some
check items during POST to speed up POST after you
power on the computer.
Disabled Normal POST.
•
Boot Sequence C,A,SCSI,
...
C,CDROM,A
LS/ZIP, C
Any search sequence can be chosen for bootup.
•
Swap Floppy
Drive
Enabled It will exchange the assignment of A&B floppy drives.
Disabled The assignment of A&B floppy drives are normal.
•
Boot Up Floppy
Seek
Enabled BIOS searches for floppy disk drive to determine if drive
is ready for diskette read/write during booting.
Disabled Skips drive seeking to speed up system booting.
•
IDE Hard Disk
Write Protect
Enabled
Disabled
Does not allow IDE hard disk to write any data.
Allows IDE hard disk to write any data.
•
Driver A Boot
Permit
Enabled
Disabled
Boot from driver A function is enabled.
Boot from driver A function is disabled.
•
Boot Up
Numlock Status
On
Off
Keypad is used as number keys.
Keypad is used as arrow keys.
•
Gate A20
Option
Normal The A20 signal is controlled by keyboard controller or
chipset hardware.
Fast It is default. The A20 signal is controlled by Port 92 or
chipset specific method.
•
Typematic Rate
Setting
Enabled Enables typematic rate and typematic delay
programming.
Disabled Disables typematic rate and typematic delay
programming. The system BIOS will use the default
value of these two items.
•
Typematic Rate 6~30 Sets the speed of the typematic rate(characters per