Manual for Advance 5/133E
SpeedEasy CPU Setup
Figure-3 SpeedEasy CPU Setup
The following indicates the options for each item and describes their meanings .
Item
Option
Description
l
CPU Model
BIOS automatically detects the CPU model, therefore
this item is shown only. It could be Pentium(R)II, Intel (R)
Celeron(TM) or Pentium III(R) depending on the processor
chosen.
l
CPU Speed SpeedEasy
CPU frequency should be set according to the CPU type.
For Celeron
TM
or Pentium
II (66MHz front-side bus) pro-
cessors, you can choose from 200MHz (66X3)~533MHz
(66x8), For Pentium
II or Pentium
III processors with
100 or 133/150MHz front-side bus, you can select from
300MHz(100X3)~800MHz(100x8), 400MHz(133x3) ~
800MHz(133x6).
Jumper
This item is only for users who understand
Emulation
all the CPU parameters, i.e. System Bus Frequency
‘ 155 /133/ 66 MHz’ and multiplication of Processor
Core Frequency to System Bus frequency “ x2, x2.5,
x3, x3.5, x4, x4.5, x5, x5.5, x6, x6.5, x7, x7.5, x8” .
l
DRAM
Bus clock
DRAM frequency same as CPU FSB. (the default is
frequency
suggested to choose)
Bus clock+33MHz DRAM frequency is faster than CPU FSB by 33MHz.
Bus clock-33MHz
DRAM frequency is slower than CPU FSB by 33MHz.
l
Clock Spread Enabled
Enables Clock Spread Spectrum to reduce EMI.
Spectrum
you can choose 133/140/150MHz host bus speed.
Disabled
Disables Clock Spread Specturm.
Note:
Dot not set CPU frequency higher than its working frequency. If you do, we will
not be responsible for any damages caused.
31
Chapter 3
