Manual for Advance 5/133E
Appendix B.
Appendix B.
Retention Mechanism & Pentium
®
II/Pentium
®
III/
Celeron
TM
Processor Installation Procedures
1. Place the retention module with four plastic nuts on the mainboard and place the four
plastic stoppers onto the plastic nuts to secure them.
Note: 1. If choosing to use Celeron
TM
Processor, snap-on Callipers onto the retention
module.
2. If choosing to use Intel Celeron
TM
PPGA 370 processor, other than placing the
callipers, the socket 370 card with CPU and CPU fan should be installed.
3. Please note the retention module has one orientation. If one way doesn’ t fit,
change the direction to the other way. Do not forcefully press the retention module
onto the mainboard.
2. Install HSSBASE (Heatsink Support Base) on mainboard, then insert the two plastic
pins through the HSSBASE securing it to the mainboard.
Appendix
57
Windows
Retention Module
with four plastic nuts
Callipers
