Q-See QH8013Z Скачать руководство пользователя страница 7

Страница: 7 / 13

OPERATION WITH DVR

The QH8013Z can be controlled using the PTZ controls on the DVR to which it is connected. In
addition, as covered in the next section,

Camera Menu

(Page 14), it can be operated using its

own menu. Most users find the DVR operation more convenient because of the ease of access.
Depending on the software used, it is also possible to control the PTZ camera remotely when you
are logged into the DVR via the Internet, a remote monitoring program or a smartphone app.
You can also program a cruise - also called “scan” or “tour” on some systems - so that the camera
will perform a set search pattern of the surrounding area. These settings can be made on the DVR
or in the camera itself. As mentioned in the section on

Connecting the Camera

, you will need to

consult your DVR’s manual for specifics on how to enable your system to control your camera. That
manual should also contain instructions on how to program points and cruises for the camera to use.
If the DVR channel that your camera is connected to is set to record when motion is detected, the
movement of the camera itself will result in constant recording.

GENERAL CRUISE SETUP PROCEDURE

Save

Zoom

Focus

Iris

Zoom

Focus

Iris

Speed: 5

No.

All

While each DVR system is different in the specif-
ics of how to set up a scan, there are general
similarities. Most involve the process of pivoting
the camera to the desired starting point and
saving that point. Then, by selecting one or more
points for the camera to move to in sequence,
a scan path is built which is then saved. Often,
multiple paths can be saved within the DVR,
which can be selected for later use.
These points can be set using a special PTZ
keyboard, or by using the PTZ controls on the
DVR itself. Two such on-screen interfaces are
shown at right; the QT-Series (top) and QC-
series (bottom). In both examples, directional
control is achieved by using the DVR’s mouse
to click on one of the directional arrows. As
long as the arrow is held, the camera will move
in that direction. The camera can continuously
rotate full-circle if desired. The camera’s eleva-
tion is limited to 90°.

EXAMPLE 1: SETTING A CRUISE

This example is based on using a QT-Series DVR without an attached PTZ keyboard. Your DVR’s
specific commands may differ slightly. Please consult your system’s manual

STEP 1.

In your DVR’s

PTZ Settings

window,

select the

Advanced

tab and then

Preset 1

STEP 2.

Rotate the camera to the desired posi-

tion using the arrow controls.

STEP 3.

Click

Save

STEP 4.

Select

Preset 2

STEP 5.

Rotate camera to desired second

location.

STEP 6.

Click

Save

You may repeat Steps 4-6 for additional posi-
tions if desired.

STEP 7.

Return to the

PTZ

window and click on

the

Cruise

button for your channel.

STEP 8.

Click

Add

STEP 9.

Double-click on the new cruise setting

to begin loading your presets.

STEP 10

. Click on the

button to open the

Preset

pop-up window and select

your starting preset point, speed and
stop time.

Speed

: 1-8 with 8 being the fastest

Time

: This is the time the camera will

stay pointed at this location.

STEP 11

. Repeat for each preset - up to a

maximum of 16 per cruise.

Serial Port

Advanced

P.T.Z

Default

Setting

Apply

Exit

CH Preset

Cruise

Track

CH Preset

Cruise

Track

Save

Zoom

Focus

Iris

Zoom

Focus

Iris

Speed: 5

No.

All

Start Track

Start Auto Scan

Start Cruise

Preset

Cruise

Preset

Cruise

Speed: 5

preset 101

All

Zoom

Focus

Iris

Zoom

Focus

Iris

STEP 12

. Click

save your settings and close the windows until you reach the

PTZ Settings

window. Click

Apply

to save all of the settings.

STEP 13

. Open the

PTZ Controls

from the

Control Bar

, select your cruise in the pull-down and

click

to begin.

EXAMPLE 2: SETTING A TRACK

An alternate method is to utilize the Track settings - also found in the

Advanced

tab. Click the

Track

button for the right channel, use the directional controls to point the camera at your desired

starting point and then click

Start Record

. The DVR will then record your movements, including

delays at selected spots. Click

Stop Record

to end. Clicking on

Start Track

in the

PTZ Control

window will start the camera on its track.

On both control panels there are controls for zoom, focus and iris (light level). The QH8013Z has
a 20x optical zoom lens which will adjust between 4.7 and 94mm. The camera has an auto-focus
feature and can be manually adjusted as well.
Of the 128 presets available on the camera, presets 1-89 may be used for defining camera posi-
tions. The remainder are commands for the camera. Of that latter group,

Preset 95

allows access

to the camera’s internal menu.