QSDR16RTCB User Manual
31
Channel Select:
Allows you select the channel with the PTZ camera.
Total:
Allows you to set the bit quantity.
Cur Point:
System has default starting (current) cruise point as 01. You can use this
option to set additional cruise points.
Stop Time:
Sets the pause time at each stop.
GOTO
:
Allows you to go to specific preset points.
Set:
Saves the preset point. After setting channel and setting the position by adjusting
PTZ direction key you click [Set] button to setup the pre-set point. Please note that you
have to click the [Save] button for the set up to be complete.
Clean:
Removes changes you made to the settings.
Note: this DVR model supports up to 100 pre-set points but you may be limited to the
number of pre-set points your PTZ camera allows.
5.7: PIP Mode
Right clicking on your mouse and clicking on [PIP Display] from the pop up menu will allow you to enter into PIP
display mode. The various modes of PIP display your DVR supports are as follows:
1x1 Display Mode:
One full screen video image and one small screen image shown on the main
display.
1x2 Display Mode:
One full screen video image and two small screen images shown on the main
display.
5.8: Mute
Right clicking on your mouse and clicking on [Mute] from the pop up menu will allow you to turn the sound off on your
DVR system.
5.9: Record
Right clicking on your mouse and clicking on [Start Record] from the pop up menu will allow you to start manual
recording.
5.10: Stop Recording
Right clicking on your mouse and clicking on [Stop Record] from the pop up menu will allow you to stop manual
recording.
5.11: Start Cruise
Right clicking on your mouse and clicking on [Start Cruise] from the pop up menu will allow you to cruise set points
with your PTZ camera once you have configured your desired cruise points.
(Picture 68)
(Picture 69)