background image

3

  Should any solid object or liquid fall into 

the system, unplug the system and have 

it checked by qualified personnel before 

operating it any further.

  Do not attempt to clean the unit with 

chemical solvents as this might damage the 

finish.  Use a clean, dry or slightly damp cloth. 

  When removing the power plug from the wall 

outlet, always pull directly on the plug, never 

yank on the cord. 

  Depending on the electromagnetic waves 

used by a television broadcast, if a TV is 

turned on near this unit while it is also on, 

lines might appear on the TV screen. Neither 

this unit nor the TV are malfunctioning. If you 

see such lines, keep this unit well away from 

the TV set. 

  No naked flame sources, such as lighted 

candles, should be placed on the apparatus.

  Changes or modifications to this unit not 

expressly approved by the party responsible 

for compliance could void the user’s authority 

to operate the equipment.

  The marking label is pasted on the bottom of 

the equipment.

FCC INFORMATION (for US customers)
 

This equipment has been tested and found 

to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable 

protection against harmful interference in 

a residential installation. This equipment 

generates, uses and can radiate radio 

frequency energy and, if not installed and 

used in accordance with the instructions, 

may cause harmful interference to radio 

communications.

•  However, there is no guarantee that interference 

will not occur in a particular installation. If this 

equipment does cause harmful interference 

to radio or television reception, which can 

be determined by turning the equipment 

off and on, the user is encouraged to try to 

correct the interference by one or more of the 

following measures:

-  Reorient or relocate the receiving antenna.
-  Increase the separation between the 

equipment and receiver.

-  Connect the equipment into an outlet on 

a circuit different from that to which the 

receiver is connected.

-  Consult the dealer or an experienced radio/ 

TV technician for help.

•  This device complies with Part 15 of the FCC 

Rules. Operation is subject to the following 

two conditions: 

(1)  this device may not cause harmful 

interference, and 

(2)  this device must accept any interference 

received,   including interference that may 

cause undesired operation.

Warning: DO NOT INGEST BATTERY,CHEMI-
CAL BURN HAZARD

 

The remote control supplied with this 

product contains a coin/button cell battery. 

If the coin/button cell battery is swallowed, 

it can cause severe internal burns in just 2 

hours and lead to death. Keep new and used 

batteries away from children. If the battery 

compartment does not close securely, stop 

using the product and keep it away from 

children. If you think batteries might have 

been swallowed or placed inside any part of 

the body, seek immediate medical attention.

  FCC RF Radiation Exposure Statement 

Caution: This Transmitter must be installed to 

provide a separation distance of at least 20cm 

from all persons.

Содержание QAA14AV012













Отзывы: