Q Experience QAA14AV012, Инструкция по эксплуатации

Страница: 8 / 12

7
General Operation
Power ON/OFF
• When you first connect the unit to the main
socket, the unit will be in STANDBY mode.
• Press the ON/OFF/SOURCE button on the
main unit or the ON/OFF button on the
remote control to switch the main unit ON.
• Press and hold the ON/OFF/SOURCE button
on the main unit or press the ON/OFF button
on the remote control to switch the main unit
back to Standby mode.
• Disconnect the main plug from the main
socket if you want to switch the unit off
completely.
Select Modes
• Press the ON/OFF/SOURCE button on the
main unit repeatedly to switch between
BT(
Bluetooth)
, LINE IN, and FM mode.
If there is no signal under the Bluetooth and
LINE IN mode, the unit will automatically
switch off within 15 minutes.
Set the Time
The built-in clock shows the correct time in the
display.
1 In STANDBY mode, press and hold the
CLOCK button on the remote control or the
SNOOZE/DIMMER button on the main unit.
This will cause the seconds/hour indicator to
blink.
2 Set the hour with the

/

button on remote
control or the
H
/
G
button on main unit.
3 Press the CLOCK button on remote control or
SNOOZE button on main unit to confirm.
4 Repeat steps 2-3 to set the minutes, year,
month and day.
During Time Setup, press the
BF
button to
select 12/24 hour format.
Set the Alarm Timer
You can set two alarms that go off at different
times.
1
Ensure that you have set the clock correctly.
2 In STANDBY mode, press and hold the
ALARM 1 or ALARM 2 buttons on remote
control or main unit for a few seconds. The
[AL1 ] or [AL2 ] will begin to blink.
3 Press the

/

buttons on the remote control
or the
H
/
G
buttons on main unit to select
an alarm sound source: FM tuner, or buzzer.
4 Press and hold the ALARM 1 or ALARM 2
buttons on remote control or main unit. The
hours digits will begin to blink.
5 Press the

/

buttons on remote control or
the
H
/
G
buttons on main unit repeatly to
set the hour.
6 Press and hold the ALARM 1 or ALARM 2
buttons on remote control or main unit. The
minutes digits will begin to blink.
7 Repeat steps 5-6 to set the minutes.
8 Repeat steps 5-6 to select whether to ring
alarm every day, only on week days, or only
on the weekend.
9 Repeat steps 5-6 to set the alarm volume.
Activate and Deactivate the Alarm Timer
Press the ALARM 1 or ALARM 2 buttons
repeatedly to activate or deactivate the timer.
- If the timer is activated, [AL1 ] or [AL2 ] is
displayed.
- If the timer is deactivated, [AL1 ] or [AL2 ]
is displayed, the will disappear from the
display on the front of the unit.
Repeat Alarm
You can press to adjust the interval to repeat
alarm. When the alarm rings, press the SNOOZE/
DIMMER button on main unit or the SNOOZE
button on remote control. The alarm repeats
ringing 9 minutes later.
Stop Alarm Ring
When the alarm rings, press the corresponding
ALARM 1or ALARM 2 button. The alarm stops,
but the alarm settings remain.
View the Alarm Settings
Press the ALARM 1 or ALARM 2 buttons to view
the alarm settings.
Set the Sleep Timer
This unit can switch to standby automatically
after a set period of time.
1 Press
SLEEP repeatedly to select a set period
of time (in minutes).
- When the sleep timer is activated, the