Python Responder LC Model 991, Руководство по установке

Страница: 32 / 64

32
© 2008 Directed Electronics. All rights reserved.
Access door
(Light Flash Fuse Jumper is under
access door - use needle nose pliers to
change fuse position)
Impact Sensor Adjustment
Make sure the keypad is unlocked and the vehicle is disarmed with no open
zones.
Press and hold the
s
button on the remote for approximately 8 seconds (at
3 seconds ignore the car select indicator) and continue holding.
The status screen clears and the LCD text displays "main menu". Release the
s
button and the LCD text changes to the remote setup options table.
Pressing the
s
AUX
button steps up one Main Menu option per press.
Pressing the
s
button steps down one Main Menu option per press.
When the desired Main Menu option (Sensor Adjust) is displayed on the
s
LCD text press and hold the button for 1 second, the remote beeps three
times and the siren will emit one long chirp confirming entry into the sensor
adjust mode.
The LCD text displays the current level setting of the impact sensor.
s
Pressing the
s
AUX
button increases the sensitivity up one level and pressing
the button decreases the sensitivity on level.
When the desired level is reached, press
s
on the remote to lock in the
setting.