Pyle PLXR2B, Руководство пользователя

Страница: 6 / 14

www.PyleUSA.com
6
INSTALLATIONS
CAUTIONS: Please follow all the installation recommendations and instructions
in this manual, Installing and for using the electronic crossover in methods other
than those outlined herein may reduce the performance capability of the crossover.
Any such installation or usage may render the product warranty void.
A. LOCATION
1. Select a mounting location that is easily and conveniently accessible, e.g.
inside the trunk.
2. To avoid damage to the crossover, keep the crossover away from any heat
source (such as the engine or any heat- generating ducts).
3. There should be adequate clearance above the crossover to allow easy
adjustment.
B. WIRING LAYOUT
Once the location of all the components has been determined, plan the best
routes for all the necessary wiring, making sure that the wires are easily
accessible without dismounting the various components.
CAUTIONS: Routing audio cables and power cables together would invariably
cause radiated engine noise in your audio system. If possible, run audio cables on
one side of your car and power cables on the other. Never route these wires
underneath the vehicle body.
1. Check and make sure the vehicle s main battery and/or auxiliary battery, if any,
is/are in good working condition and has sufficient capacity to run the electrical
components of the vehicle plus the complete audio system.
2. The crossover is designed for use in 12 volt
NEGATIVE GROUND electrical
system
ONLY
. Installing the crossover in a vehicle with positive ground electrical
system could result in serious damage to the electronic crossover, other audio
components and/or the vehicle s electrical components.
3.
FOR SAFETY, DISCONNECT THE BATTERY GROUND BEFORE INSTALLATION.