interrupted or disturbed. The hold time on the channel is 10% of the
time set for the monostable mode on this channel. In order for the
relay to operate always for ~1s from the moment the button is
released, set the time in monostable mode to ~10s (information on
setting the time is available in section 6. Setting the activation time in
monostable mode).
•
two-key
– the relay is switched on with the odd-numbered key (1, 3, 5,
7 etc.) assigned to the channel, while it is switched off by the even-
numbered key (2, 4, 6, 8 etc.). To use this mode, you must assign two
keys to one channel – even and odd. Typing only the odd key will
cause that the channel can be turned on, but it will not be possible to
turn it off (no even key assigned).
In case if only an even key is assigned to a given channel and the
receiver does not respond, it may mean that the channel is set in two-
key mode.
8