PXM PY511, Руководство пользователя, Страница: 6 / 14

4 Adding transmitter to memory
1. Press and hold the learning button for 1 – 3s.
2. All LEDs will light up – release the learning button.
3. Select the channel to which the transmitter is to be assigned with the
learning button.
Channel 1 Channel 2 Channel 3 Channel 4
K1 K2 K3 K4 ZAS K1 K2 K3 K4 ZAS K1 K2 K3 K4 ZAS K1 K2 K3 K4ZAS
4. After selecting the channel on the receiver, you need to press the key
on the transmitter to be responsible for the selected channel.
5. Pressing the button on the transmitter will blink the channel LED to
which the selected key will be assigned.
6. Press the same key again to save the selection to the receiver's
memory.
7. The receiver will blink all red LEDs and turn them off – it means that
the procedure of assigning the key to the selected channel was
successful.
6
K1 K2 K3 K4ZAS