NOTE! If the key has been programmed to several channels, then the relay
activation time will be changed in all channels that were assigned to it.
7
Deleting the stored keys
The deletion of all memorized keys has no effect on the operating modes
of individual channels and the switching times of relays in monostable mode.
To delete all stored keys:
1. Press and hold the
learning
button for more than 8s.
2. All the LEDs will start blinking, then they will blink significantly faster,
when they light up permanently, you can release the
learning
button.
3. All
red
LEDs will turn off.
4. The procedure has been successfully completed, please check the
deletion.
NOTE! Deleting deletes all stored keys. If the user wants to delete only one
key, then after the deleting process, the ones to be saved must be re-entered.
Disconnecting the power supply does not cause any loss of information about
the stored keys and receiver operating modes.
11