PXM PX091, Руководство пользователя, Страница: 4 / 11

3. FRONT PANEL (CONTROL PANEL)
TEST
4
DMX OK
Dimmer output channels control LEDs.
OUTPUTS
SETTINGS
DISPLAY
L1, L2, L3
4. OUTPUT SIGNAL INTERRUPTION DIAGNOSIS
Power supply LED indicators
Output channels LED indicators
Programming keys
Display
DMX signal presence
LED indicator
TEST key
When the dimmer is not in the programming mode (the display shows DMX address), the test
button forces all outputs to light up at 100%, light all the LEDs and all the display segments. It also
checks the output lines status (used bulbs).
Twinkle LED for DMX signal presence.
There are four buttons for dimmer programming:
ENTER - starts programming mode and confirms settings
NEXT - scrolls MENU forwards or increases values set
PREV - scrolls MENU backwards and decreases values set
CANCEL - allows to cancel programming ( without saving)
During normal operation shows the DMX address of the first channel. In the programming mode
shows currently programmed parameter.
Power control LEDs. For the proper work of the dimmer at least L1 LED should be lit up.
Three-colours LEDs diagnose status and condition of outputs channels. Their brightness is
proportional to light intensity at the corresponding channel and the LEDs colours (green, yellow,
red) mean in order:
- green - channel is ok (working properly)
- yellow - channel is working with individual settings
- red - channel is working improperly or not working. Posibility of damage of cable or bulb.
The last function (red sign) is visible while button TEST is pressed and held. The LEDs that are
ascribed to the damaged channels will turn RED and the others LEDs will light up green.
After the TEST button is released, the dimmer turns back to normal work and all the channels
within the damage was diagnosed will be still enabled (applies to software 2.04 version or newer).