PXM PX091 Скачать руководство пользователя страница 11

11

PXM Marek Żupnik Limited Partnership

ul. Przemysłowa 12
30-701 Kraków, Poland

AC Dimmer 12 x 1200 W

PX091

                     

   mgr inż. Marek Żupnik

PN-EN 60065:2004/A2:2011

PN-EN 55014-1:2012

1. All DMX512 inputs and outputs must be shielded and 

the shielding must be connected to pin 1 XLR plug.

2. The dimmer PE terminal must be connected to efficient 

ground installation equipped with the residual-current 
circuit breaker.

3. The dimmer can be installed in the closed switching 

stations only.

Name of producer:

Address of producer:

declares that the product:

Name of product:

Type:

 

answers the following product specifications:

LVD:

EMC:

 

 

Additional informations: 

Kraków, 15.10.2012

DECLARATION OF CONFORMITY

according to guide lines 2004/108/EC and 2006/95/EC

stage and theatre consoles             digital dimmers               dmx systems              architectural lighting controllers              led lighting

tel:    +48 12 626 46 92
fax:   +48 12 626 46 94

e-mail: [email protected]      
http://www.pxm.pl

ul. Przemysłowa 12
30-701 Kraków, Poland

Содержание PX091












Отзывы: