PVR EU300F Скачать руководство пользователя страница 3

3

LI 4431.00 (IT-EN)

Operating and maintenance instructions

EN

1. General information

This manual contains information necessary for the proper operation of the pump in 
order to prevent unsuitable use and for the safety of the operators. Do not attempt any 
other type of operation without having first contacted our Service Department. The 
information provided herewith does not intend to replace, integrate or change any rules, 
regulations, law by decree, directive or law of specific character in force in the Country 
where the installation takes place.
The suggestions given to the staff engaged in the installation and servicing assumes 
that the personnel is expert and prepared in facing any problem of servicing, both 
mechanical and electrical. For any questions or information not included in this manual, 
please contact our Service Department, always providing: model (Model), serial number 
(Serial), year of manufacture, stated on the pump name plate.

Symbols used:

WARNING: 

 

 

 

 

     

Instructions that, if not followed,  

 

      ELECTRIC SAFETY

could result in serious 
personal injuries.
 

       

 

 

 

 

 

 

 

 

 

 

 

 

      FIRE HAZARD

NOTE: 

 

 

 

 

      

Instructions that, if not followed, 
could result in pump damages.   

 

      READ THE OPERATING

 

 

 

 

 

 

 

       INSTRUCTIONS

 

 

 

 

 

 

 

       

HOT SURFACES

   

 

 

 

       

 

 

 

 

 

 

 

       

INLET PORT

 

 

 

 

 

 

 

       

HARMFUL SUBSTANCES  

 

 

       

 

                   

EMISSIONS

 

 

 

 

 

      EXHAUST PORT

DO NOT DISPOSE INTO    

 

 

      

THE ENVIRONMENT

 

 

 

 

      DISPOSAL

Содержание EU300F























Отзывы: