Nixie Tube Clock ‘LTC’
Issue 1 (1 November 2011)
www.pvelectronics.co.uk
- 27 -
8.5 Mini-DIN Connector and PCB pinout.
This information is needed if you are connecting a DCF / WWVB / MSF
receiver to the clock PCB directly, or without using our mini-DIN extension
cable. The following connections are required for connecting a DCF /
WWVB / MSF receiver module:
Bare PCB and DIN Socket connections:
Module connections:
Note that one pad is not connected (NC).
There are no special requirements for the cable used: light duty 4-way
signal cable is suitable for making the connections.
