128-7914
13 of 20
-13-
System Settings
Auto Report Interval -
Adjusts the time between vehicle location reports. You can select none to 24
hours. When you select none, the auto report will record the trip start, stationary vehicle (when vehicle
stops) and then end of trip (10 minutes after the vehicle has become stationary).
Auto Report Duration -
Adjusts the length of time the Auto Report will function. The adjustment is from 1
hour to forever. The Auto report time duration begins when the "Auto Report" command is activated in the
System Commands page.
Excessive Speed Alert -
Adjusts the vehicles speed notification . The adjustment is from 50 to 120 MPH.
Geo Fence -
Adjusts the trigger radius around the vehicle for Inside and Outside Geo Fence notification.
The adjustments are ½ mile to 500 miles.
Low battery Alert -
Adjusts the battery voltage threshold for Low battery notification. The adjustment is
10-12.25 volts.
Remote Diagnostics -
Displays the system current status.
System Commands
The System Command page allows you to send a number of system control commands to your PursuiTrak
GPS System installed in your vehicle. To use any of these commands, simply click on the System Com-
mands button and then click on your desired command. It may take up to 3 minutes for a command confirma-
tion, since the GPS Command message has to broadcast over the wireless network and then send back an
acknowledgment. Please be patient.
