128-7914
12 of 20
-12-
Commands Page
The commands page allows you to send a number of control commands to your vehicle. To use any of the
configured alarm commands, simply click on the Alarm Commands button and then click Activate/Deactivate
on your desired command. It may take up to 3 minutes to receive a command confirmation, since the Alarm
Command message has to broadcast over the wireless network and then send back an acknowledgment.
Please be patient.
Here is a description of the available control services:
•
Arm System/Lock Doors/Geofence On -
Clicking this command performs the described action and
does not require any additional steps.
•
Disarm System/Unlock Doors/Geofence Off -
Clicking this command performs the described ac-
tion and does not require any additional steps.
•
Activate Remote Engine Start -
Clicking this command will activate the remote engine starter and
does not require any additional steps.
•
Theft Reset -
Clicking this command stops theft track and arms the alarm and tracking unit. The alarm
must be disarmed in order to start the vehicle.
•
Unlock Only -
Clicking this command will send a door unlock only command.
•
Starter Interrupt -
Clicking this command will either activate or deactivate Starter Interrupt.
Note:
1.
Each time you perform one of these commands, one (1) message credit will be withdrawn from
your account balance.
2.
To receive alarm notifications and to activate remote engine start, your vehicle must be equipped
with an alarm system that provides these features.
