PURSUIT S428 SPORT, Руководство пользователя

Страница: 37 / 196

Helm Systems
2-5
off plane, rotate the pitch wheel forward, bow
down, to improve the running angle and oper-
ating efficiency.
Trim Tab Control Panel
To turn the Zipwake system ON, press and
hold the POWER/MENU button.
To turn the Auto Pitch & Roll Control ON/OFF,
press and hold the AUTO button. When the
Auto Pitch and Auto Roll functions are acti-
vated a green arc will display on the control
panel. The Auto Roll level and Pitch Angle
will also display numerically. The Pitch Angle
displays in degrees. The port and starboard
Interceptor position display on the bottom of
the screen. The display is for the extension
in percent.
Boat speed is displayed in the center bottom
of the display. The boat speed is the cur-
rent speed over ground. If no GPS signal is
detected, the speed number will not be dis-
played.
2.10 Compass
The compass is located at the helm. To adjust
the compass, read the instructions on ‘Com-
pass Compensation’ provided with this man-
ual. The compass cannot be adjusted accu-
rately at the factory; it must be compensated
for the influence of the electrical equipment
and electronics unique to your boat. The com-
pass should be adjusted by a professional
after all electronics and additional electrical
accessories are installed and before operat-
ing the boat.
2.11 Bow Thruster
The bow thruster is electrically driven and
controlled by a joystick on the helm. Operate
in short bursts of a few seconds to preserve
battery life. For service access to the bow
thruster, battery, and electrical control box,
remove the berth mattress and open the for-
ward berth access panel. Refer to the bow
thruster owner’s manual for more operation
and maintenance information.