background image

Data sheet

4. WARRANTY 

The distributor guarantees the equipment for a period of two years in the event of any non-compliance detected in the equipment, 

in accordance with Royal Decree 1/2007 of 16 November (revised text of the General Law for the Defence of Consumers and Users).

- The guarantee includes the repair and replacement of faulty parts by personnel authorised by the distributor or by the official 

technical assistance service (S.A.T.) at the place of installation or in its workshops. Included in the warranty is labor and shipping 

costs that may be generated.

- The distributor is exonerated from providing a guarantee in the case of parts subject to natural wear, lack of maintenance, blows 

or other nonconformities resulting from improper use of the equipment or inadequate according to the conditions and operating 

limits indicated by the manufacturer of the same. Likewise, the warranty becomes ineffective in cases of improper handling and use 

of the equipment or in those cases in which they have been modified or repaired by personnel outside the distribution company 

or official S.A.T..

- The parts replaced under warranty will remain the property of the distributor.

- The distributor is responsible for the lack of conformity of the equipment when it refers to the origin, identity or suitability of the 

products, according to their nature and purpose. Bearing in mind the characteristics of the equipment it is essential for the warranty 

to cover the lack of conformity, the fulfillment of the technical conditions of installation and operation. Failure to comply with these 

conditions may result in the absence of a warranty, taking into account the relevance of the destination of the equipment and the 

conditions and operating limits in which it must operate.

- The distributor must ensure that the installed equipment is suitable for improving the quality of the water to be treated in parti-

cular, according to the characteristics of the equipment and the regulations in force.

- The distributor must ensure the correct installation and start-up of the equipment as indicated by the manufacturer and current 

regulations and will also be liable for any lack of conformity resulting from incorrect application, installation or start-up of the 

equipment.

- For any warranty claim it is necessary to present the purchase invoice. The period of two years is calculated from the purchase of 

the equipment from the distributor.

- If there is a problem with your equipment during the warranty period, please contact your dealer.

The equipment is installed and operating to the customer’s satisfaction and for the record:

* Pre-treatment of the equipment:

* Hardness of entry to the equipment (ºF):

* TDS input to the equipment (ppm):

* TDS produced water (ppm):

* Pressure of entry to the equipment (bar):

*Result of the installation and commissioning sheet:

Correct:

Others:

The owner of the equipment has been properly and clearly informed of the use, handling and maintenance that the equipment 

requires to ensure its proper functioning and the quality of the water produced. A maintenance contract is offered for this purpose.

*Ref: Maintenance contract:

ACCEPTS the maintenance contract

DOES NOT ACCEPT the maintenance contract

If you need information, report a malfunction or malfunction, request for maintenance or intervention by a technician, please read 

the operation, troubleshooting and troubleshooting sections of this manual beforehand and contact the distributor or company 

that sold you your equipment.

COMPANY AND/OR AUTHORIZED INSTALLER, DATE AND SIGNATURE:

NOTE TO THE COMPANY AND/OR AUTHORIZED TECHNICIAN/INSTALLER: the data marked with the * symbol must be filled in 

by the installer and transcribed by him/herself from the INSTALLATION REGISTRATION sheet.

SERIAL NUMBER:

4. WARRANTY 

The distributor guarantees the equipment for a period of two years in the event of any non-compliance detected in the equipment, 

in accordance with Royal Decree 1/2007 of 16 November (revised text of the General Law for the Defence of Consumers and Users).

- The guarantee includes the repair and replacement of faulty parts by personnel authorised by the distributor or by the official 

technical assistance service (S.A.T.) at the place of installation or in its workshops. Included in the warranty is labor and shipping 

costs that may be generated.

- The distributor is exonerated from providing a guarantee in the case of parts subject to natural wear, lack of maintenance, blows 

or other nonconformities resulting from improper use of the equipment or inadequate according to the conditions and operating 

limits indicated by the manufacturer of the same. Likewise, the warranty becomes ineffective in cases of improper handling and use 

of the equipment or in those cases in which they have been modified or repaired by personnel outside the distribution company 

or official S.A.T..

- The parts replaced under warranty will remain the property of the distributor.

- The distributor is responsible for the lack of conformity of the equipment when it refers to the origin, identity or suitability of the 

products, according to their nature and purpose. Bearing in mind the characteristics of the equipment it is essential for the warranty 

to cover the lack of conformity, the fulfillment of the technical conditions of installation and operation. Failure to comply with these 

conditions may result in the absence of a warranty, taking into account the relevance of the destination of the equipment and the 

conditions and operating limits in which it must operate.

- The distributor must ensure that the installed equipment is suitable for improving the quality of the water to be treated in parti-

cular, according to the characteristics of the equipment and the regulations in force.

- The distributor must ensure the correct installation and start-up of the equipment as indicated by the manufacturer and current 

regulations and will also be liable for any lack of conformity resulting from incorrect application, installation or start-up of the 

equipment.

- For any warranty claim it is necessary to present the purchase invoice. The period of two years is calculated from the purchase of 

the equipment from the distributor.

- If there is a problem with your equipment during the warranty period, please contact your dealer.

The equipment is installed and operating to the customer’s satisfaction and for the record:

* Pre-treatment of the equipment:

* Hardness of entry to the equipment (ºF):

* TDS input to the equipment (ppm):

* TDS produced water (ppm):

* Pressure of entry to the equipment (bar):

*Result of the installation and commissioning sheet:

Correct:

Others:

The owner of the equipment has been properly and clearly informed of the use, handling and maintenance that the equipment 

requires to ensure its proper functioning and the quality of the water produced. A maintenance contract is offered for this purpose.

*Ref: Maintenance contract:

ACCEPTS the maintenance contract

DOES NOT ACCEPT the maintenance contract

If you need information, report a malfunction or malfunction, request for maintenance or intervention by a technician, please read 

the operation, troubleshooting and troubleshooting sections of this manual beforehand and contact the distributor or company 

that sold you your equipment.

COMPANY AND/OR AUTHORIZED INSTALLER, DATE AND SIGNATURE:

NOTE TO THE COMPANY AND/OR AUTHORIZED TECHNICIAN/INSTALLER: the data marked with the * symbol must be filled in 

by the installer and transcribed by him/herself from the INSTALLATION REGISTRATION sheet.

SERIAL NUMBER:

Содержание VYRTA direct flow

































Отзывы: