PUREWASH
12
I JUST USED MY PUREWASH SYSTEM FOR THE FIRST TIME RINSING MY CAR AND I
HAVE SPOTS? DISAPPOINTED!
Rats! We hate it when that happens…it’s why we created the system in the first place! Assum-
ing those spots weren’t already there (ahem…our system only keeps them from forming; it
does not remove them), this could be due to a few issues.
The primary causal factor is letting the work surface dry outdoors when ‘stu
ff
’ is floating in the
air and lands on the drying water causing a ‘dust ring’. Airborne pollen and neighbours with
yard blowers are the bane of *spotless* existence so keep an eye (and ear!) out for these con-
taminant sources. (A windy day is going to carry dust in the air)
Another causal factor could be that the output hose you’re using is old…and probably a 50
footer. Over time, hoses will absorb minerals and the first thing deionised water wants to do is
collect ’em up and (unfortunately) carry them out the business end of the hose and onto your
work surface. As long as your meter is reading 0, the only thing coming out the business end
of the system is hydrogen & oxygen so be sure you’re not donating any unnecessary minerals
to your spot-free water. A new hose should solve the problem.
Another reason may be that you’re rinsing away pockets of soapy water and some of that is
getting bounced onto areas you’ve already rinsed o
ff
. Don’t use more water than you have to,
but it is necessary to remove all soapy and/or ‘dirty’ water to enjoy the *spot-free* capability
we designed into the system.
CAN I USE A WATER BLASTER WITH MY PUREWASH SYSTEM?
Yes! A domestic water blaster draws approximately 5-10 litres of spot free water through the
system. This is a great idea to rinse o
ff
the soap o
ff
your car quickly or to maintain your vehi-
cles appearance on a frequent basis without the need to scrub or chamois. Using a water
blaster will get the job done quicker!
Using a water blaster is twice as e
ff
ective as a ‘water broom’, a spray nozzle to blast contam-
inants o
ff
flat surfaces a lot quicker than a standard hose nozzle.
ALTO 5L- 8-12 Litre per minute
ALTO 10L 14-18 Litres per minute
CAN I LAY THE SYSTEM DOWN TO TRANSPORT IT?
Yes. Make sure the system is sealed by ball valves. For extra water tightness use the supplied
hose on outlet and inlet ports to seal the system also. The usual checks apply to tying down-
time system so it doesn’t bounce around. The responsibility is your’s not PUREWASH LIMIT-
ED.
FREQUENTLY ASKED QUESTIONS
