PUREWASH
10
WILL THIS UNIT WORK WITH WELL WATER?
Some well water users have experienced adverse results when using the system downstream
of iron removers and/or water softeners. It is best to use the system with your well water be-
fore it passes through any stripper/softener and do not use if your PUREWASH unit TDS me-
ter reads any number above 0 (typical resin life exhibits 000 ppm through approximately
90ppm.
WILL SOFT WATER EXTEND THE LIFE OF MY RESIN?
Softened water (potassium or sodium based) will not extend the life of the resin. The TDS
count of the water coming out of the water softener will be (more or less) the same as the wa-
ter going into your softener and may damage your work surface in cases with high levels of
total dissolved solids in the supply water.
WILL IT REMOVE MY WAX?
No, it will not remove your wax and the best part is that you do not have to worry about tiny
scratches cause by drying with a towel or chamois!
WILL THE RESIN GO BAD IF I LET MY SYSTEM SIT FOR A LONG TIME BETWEEN USES?
Yes, it is possible. After long periods of non-use there is a possibility that algae can form and
foul the resin. If it is going to sit for a long period of time with out use (60-90 days) we suggest
that you remove the resin cartridges, allow them to drip dry and dry the inside of the blue
housings to prevent algae growth.
DO I NEED TO USE A SPECIAL SOAP?
No, you don’t need to use a special soap to achieve spotless results using our systems. Just
use your normal soap and make sure you rinse thoroughly wherever soapy water can be
trapped. Be mindful of soapy or contaminated water that can get trapped in places and dis-
placed by our *spot-free* water, only to land on a spot you’ve already rinsed! Rinse and rinse
again is often a good idea in problem areas.
CAN I DRINK THE WATER?
No, please do not drink the water. Deionised water produced by our system is not meant for
human consumption and has no nutritional value.
FREQUENTLY ASKED QUESTIONS
