PUREWASH
3
SAFTEY AND MAINTENANCE
To maintain the high quality of the purified water the filter cartridges/resin need changing
every 6-12 months (dependent on water quality and usage). You can obtain replacement car-
tridges and resin from your local
PUREWASH
supplier. To maintain performance and
warranty use genuine
PUREWASH
replacements.
Also follow these guidelines:
•
Where line pressure exceeds recommended max pressure on housing label a pressure limit-
ing valve must be installed. Protect the housing from water hammer.
•
Use on water only up to 52°C. For installation over 52°C please enquire as to a suitable
housing. Protect the housing from freezing.
•
Use PTFE thread seal tape on all connections. Use of pipe sealants will void warranty.
•
Do not overtighten. Too much tape or over tightening may cause head to split.
Installation Note:
A water filter system/tap, like any product, has a limited life
and may eventually fail. Also sometimes failure happens early due to unforeseen circum-
stances. To avoid possible property damage, this product should be regularly examined for
leakage and/or deterioration and replaced when necessary. A drain pan, plumbed to an ap-
propriate drain or outfitted with a leak detector, should be used in those applications where
any leakage could cause property damage, and/or the water supply should be turned o
ff
if no
one is home/present.
Positioning Your Filter:
If you choose to solid/permanently mount you system choose a loca-
tion where any water spillage will not cause damage. Make sure mounting position is solid so
that the filter housing stays in position when changing filters. An isolation valve may be in-
stalled immediately prior to the filter to isolate the filter for changing the cartridge and resin.
For detailed instructions on how to maintain your
PUREWASH
System please continue
to read below.
