7
Getting Started
Charging the Battery
Before using your Phone Clip 2, you need to
fully charge the rechargeable battery.
To charge it, plug the charging cable into the
Phone Clip 2 as shown in the picture to the
right.
Then plug the other end of the charging cable
into a power outlet.
During the charging process, the light
indicator (LED) at the top of the Phone Clip 2
will show a solid red light.
When fully charged and still connected to
the charger, the LED will turn solid green
interrupted by a red blink every 2 seconds.
Charging an empty battery typically takes
around 3 hours. It is safe to leave the charger
connected overnight – the battery cannot be
overcharged.
• When charging your Phone Clip 2 for the
first time, leave it to charge for at least 3
hours, even if the battery indicator shows
that the unit is fully charged (see section
about “Light indicators”).
• For safety reasons, recharge the battery
only with chargers supplied.
Do not charge the
Phone Clip 2 while it
is on your body.
