Turning your Phone Clip 2 ON and OFF
8
To turn ON your Phone Clip 2 slide the ON/ OFF switch (1 on page 6) down
to the ON position. A white ”I” icon will be visible on the base of the switch
and the LED indicator will now blink green every 2.5 seconds.
To turn it OFF, slide the ON/OFF switch up to the OFF position. The LED
will now stop blinking.
If battery level is low the LED will blink yellow every 2 seconds indicating
that the unit should be recharged.
Pairing to hearing instruments
Note!
The following information is intended primarily for your Hearing Care
Professional, who in most cases will complete the tasks that are necessary
before the Phone Clip 2 can be used with your hearing instruments.
However, the process is designed to be simple and should be easily
accomplished by almost anyone.
1. Make sure Phone Clip 2 is turned on. Your hearing instruments must be
OFF – this is done by opening the battery door on the hearing instrument(s).
2. Remove the silver cap from the Phone Clip 2. With the tip of a pen or
similar object, press the small white pairing button one time on the back of
your Phone Clip 2 (see picture to
the right). The LED will now blink
yellow every 2 seconds to indicate
that is ready to be paired to your
hearing instruments. Your Phone
Clip 2 will remain in pairing mode
for 20 seconds.
