Edition from 05.06.2015
17
PLCM-E4.
Ethernet/USB controller of CNC machine
www.purelogic.ru
8 (800) 555 63 74
05. Software installation
Fig. 14.
Network connection components/ TCP/IP configuration
06
Terms of Warranty
The warranty period is 12 months after purchasing and is valid only
if all operational conditions and scheduled maintenance are strictly
followed.
1. General terms
1.1. In case of product acquisition as separate components, Seller
guarantees working ability of every component, but does not
assume responsibility for the quality of their joint work (mismatch
of components). If you have questions please consult our technical
support team.
1.2. Seller does not guarantee compatibility of the purchased product
with the one that Buyer already has or bought from third parties.
1.3. Product’s component parts and configuration can be changed by
manufacturer without notice due to the product consistent technical
improvement.
2. Conditions for warranty acceptance
2.1. The product is accepted only in the same completeness of set as it
was purchased.
3. Warranty service procedure
3.1. Warranty service is performed by testing the claimed product
defect.
3.2. If the defect is proved, warranty repair is carried out.
4. We do not assume any responsibility for glass, electric lamps,
starters and expendable materials as well as:
4.1. Damaged product caused by inappropriate transport and store
conditions, wrong connection, operation in abnormal (off-design)
mode, or in conditions which are not manufacturer-supplied (including
temperature and humidity out of limits of recommended range), having
damages due to third-party circumstances (voltage jumps, natural
disasters, etc.), also having mechanical or thermal damages.
4.2. The product with traces of foreign objects or substances impact,
including dust, liquids, insects, also objects having extraneous
inscription.
4.3. The product with traces of unauthorized tampering and (or) repair
process (traces of opening, home-made soldering, elements changing
etc).
4.4. The product with self-diagnostic function that shows improper
exploitation.
4.5. Technically complex product in respect of which assembly and
integration and start-up works were not performed by Seller specialists
or by recommended organizations, except in cases directly regulated
under goods documentation.
4.6. In cases when the product exploitation was performed in
conditions when power supply did not correspond with manufacturer’s
requirements, also when there is no electrical protection device.