17
VIP-NET-0424-1G QUICK START GUIDE
VERSION 1.1
5.
Run your Web browser on the PC and enter the factory default IP address, so as to access the
switch’s Web interface.
If your PC is configured correctly, you will see the login page of the switch as shown in Figure 9 below.
Figure 9: Web Interface login page
If you do not see the above login page, please perform the following steps:
•
Refresh the web page.
•
Check to see if there is an IP conflict issue.
•
Clean browser cookies and temporary internet files.
•
Check your PC settings again and repeat step 2.
Enter the factory default username and password in login page.
Click “Login” to log into the switch.
NOTE
: The factory default Username of the switch is
admin
.
There is no factory default Password of the
switch.
