14
VIP-NET-0424-1G QUICK START GUIDE
VERSION 1.1
Connecting the AC Power Cord
Step 1:
Connect the AC power cord to the AC power
receptacle of switch.
Step 2:
Connect the other end of the AC power cord
to the AC power outlet.
Step 3:
Check the SYS LED. If it is ON, the power
connection is correct.
Connecting the DC Power Cord
Step 1:
Insert the negative/positive DC wires into
the V-/V+ terminals, respectively.
Step 2:
To keep the DC wires from pulling loose,
use a small flat-blade screwdriver to tighten the
wire-clamp screws on the front of the terminal
block connector.
Step 3:
Insert the terminal block connector prongs
into the terminal block receptor.
Step 4:
Check the SYS LED. If it is ON, the power
connection is correct.
Figure 6: Connecting the AC power cord
Figure 7: Connecting the DC power cord
