PureLink IPAV Pro Series, Руководство пользователя, Страница: 50 / 80

User Manual
IPAV Pro Series
43
To control, if the HDMI audio is being delivered on the HDMI or the analog output
port, complete the following steps:
1)
Right click the gear icon on a Receiver (RX) tile and select "Settings" in the menu.
2) To route audio to the HDMI output, select the "HDMI Audio Output" tab and then
choose one of the following options:
a) Analog Audio: Select the stream from the analog audio input of the TX to
embed it into the HDMI output signal.
b) HDMI Audio (Stereo Downmix): Select the audio stream from the HDMI input of
any TX to embed it into the HDMI output signal. If the HDMI audio stream is
multichannel PCM audio, it will be downmixed to 2-channel PCM audio.
c) HDMI Audio (All Available Channels): Select the audio stream from the HDMI
input of any TX to embed it into the HDMI output signal. The multichannel
HDMI audio will not be downmixed.
3) To send the audio to the analog output connector (mini XLR), select the "Analog
Audio Output" tab and choose "HDMI Audio (Downmix)" from the pull-down
menu.
4) Click "Save" to apply changes.
5) The sound device connected to the analog audio output of the RX will now play
out the HDMI audio stream.
Tipp: If no audio is playing, confirm that the TX device is actually streaming. Also,
verify the RX audio output settings are correct.
Note: Downmixed 2-channel audio is not available for proprietary Dolby or DTS audio
formats.