PureLink IPAV Pro Series, Руководство пользователя, Страница: 35 / 80

User Manual
IPAV Pro Series
28
5. Operation of IPAV Pro Control Center
5.1 General Information
The "IPAV Pro Control Center" is a control software used to configure and control
signal extension, routing and switching between IPAV TX and IPAV RX units.
The IPAV Pro Control Center does not directly communicate with or control the IPAV
TX & IPAV RX devices. Instead, it communicates using a separate process, functioning
as a proxy between the IPAV Pro Control Center clients and IPAV Pro end points
(TX/RX) on the network.
The IPAV Pro Control Center can be used on any Windows PC using Microsoft .Net
framework 4.0 or later.
The PC running the IPAV Pro Control Center can be connected to the ETHERNET port
of any device or to any RJ45 port of the 10GbE switch except the
management/console port (which is not part of the actual network).
Before proceeding, make sure all IPAV Pro units are powered on. Ensure that the IP
addresses of PC and all IPAV Pro units are on the same local area network (LAN).
Start the application by double clicking on " IPAV Pro Control Center.exe " file. If you
receive a pop-up asking for network access confirmation, make sure that both private
and public networks are allowed.