PureLink IPAV Pro Series, Руководство пользователя

Страница: 39 / 80

User Manual
IPAV Pro Series
32
5.3 Start IPAV Pro Control Center
First, connect to the Control Server by entering the IP address of the device running
the NT Control Server and click
CONNECT .
Note:

If the Control Server is running on the same machine, as the client, use the IP address
127.0.0.1, which is the IPV4 loop-
back address for “localhost”.

Do not modify the default port number of 6970. The Control Server currently only
listens to port 6970.
After connecting to the Control Server, the IPAV Pro Control Center will show
discovered devices as tiles. There are few things to take note of:

The application features many different tabs to control the HDMI routing, as well
as routing of other signals such as analog audio, RS232 control, etc. The default
current tab should be "Video Switching", meaning that the video source displayed
by an RX device (Receiver).

The top area of the user interface is labeled "Receivers". All RX devices detected
on the network will appear here.