PUREGAS, LLC
P200W2 Series Dehydrator User’s Guide
Page 25 of 82
P012213 – Rev. F
6.5.19
Connect a Network IP
cable to the UTP Port on the
back of the Dehydrator (if
applicable).
6.5.20
Let Dehydrator run until
the Humidity is
5%
or below.
(May take 15 – 20 minutes).
NOTE
: Press the
RESET
Button if Dehydrator goes
into
SHUTDOWN
.
6.5.21
Connect the Precision
Bleed Orifice Fitting to the
Dehydrator Outlet Port
Fitting.
WARNING!
DO NOT CONNECT THE DEHYDRATOR TO THE SUPPLY LINE
UNTIL THE HUMIDITY READING IS 5% OR LESS.
IMPORTANT!
Installing the Precision Bleed Orifice Fitting will allow
Dehydrator to have a constant flow preventing high humidity.
