purecold 2CSMA1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 41

9
Pure Cold INSPIRATION2 Installation, Maintenance Manual 2022 | Issue Date: AUG 2022 REV 1
The fixture must be located in such a manner that air will freely circulate around the
evaporative tray and rear of the case to avoid the formation of condensation. A gap of
3”
needs to be maintained to the rear of the display case for a heat exhaust vent. The air
must then be allowed to freely circulate either over the top of the cabinet into the store,
or (if there it is large enough) into the ceiling void.
The finished backs on these cases and oversized end caps ensure adequate air flow spac-
ing.
Icon fixtures are designed to be air or water cooled.
Failure to allow the air to escape may lead to condensation and water pooling or the fix-
ture tripping out on high pressure.
Ensure that adequate refrigeration, electrical isolation, and circuit protection is in-
corporated within the final installation as necessary to meet all relevant require-
ments and match the design criteria of the supply systems.